NEW Vision Battery
Battery Vision Spinner 2 Color1600mAh clone 1:1
Vision Spinner 2 has a number of improvements compared to the
first generation. The combined have many features and advantages
of the first generation, but at the same time has created a new
and unique model – Spinner II 1600mAh
The most important changes!
- The new upgrade of security PCB (against short)
- More comfortable and more ergonomic knob for setting the voltage (knob operates smoothly and at scales 3.3V 3.8V 4.3V 4.8V is the characteristic “click”)
- Battery capacity increased to 1600mAh which makes the Spinner II is even stronger and more efficient
- Increased life of the new battery with PCB
Instruction enabling and disabling the battery:
– Batteries are switched on and off by pressing the button 5 times within 2 seconds
– When the battery is disabled or enabled button flashes 3 times in different colors to show that it is enabled or disabled
Voltage settings:
– Spinner 2 is able to accept voltage from 3.3 v to 4.8 v (and everything between)
– The scale at the bottom shows the voltage
– Turn the bottom cap to adjust the red lines with the lower scale of the selected voltage described numbers
3 levels of charge
Spinner II can lights up 3 colors, depending on the charge (not highlighted)
Color white Charged 60 – 100%
The Blue color charge the 30 – 60%
The Orange color 0-30% recharge time
If the battery will blink 15 times means that it is completely discharged.
Spinner II Battery is no different than eGo battery so needs standard charger (420mA) USB and wall adapter 500mA.
Use any custom charger especially with higher charging current for example, such as the iPhone will cause damage.
Spinner II has upgraded construction of the head, it will be not compatible with standart Lanyards
Specifications:
Length: 124.5mm
Diameter: 16.5mm
Weight: 61.8g
Thread 510/eGo