Lemo 2 – a step in the right direction

iSmoka Lemo 2 RTA Atomizer

At the beginning of parameters and digits:

• Height: 76.2mm
  
• Width: 22mm
  
• Capacity: 3,8ml
  
• Recommended resistance heater: ≥ 0.3Ω (buying Lemo 2 will have installed ready setup 0.5Ω)

iSmoka LEMO 2 news and features worth mentioning

Lemo 2 will have a new “system” filling the tank. In the first version Lemo 2 RTA  had to unscrew the lower part of the evaporator, then unscrew the screw cap and could only fill the tank. Now it will be much easier – take a look at the pictures:

We will only have to turn the ring in top-cap and close the air flow at the bottom of the atomizer – without loosening the screws and each time the atomizer from the Mod.
Airflow (air flow) has also been rebuilt. He was transferred out of the atomizer and takes the form of a horizontal “bar”. The first version of Lemo 2 atomizer forced us to remove the lower part of the Lemo 2 atomizer and air flow regulation using a screwdriver that was awfully tiring. In addition, the screw was set loosely so that she could not sit still

The last thing worth mentioning is PEEK insulator (ie, capable to resist high temperature and corrosion). It’s always better to have it than not have it – especially the heaters are recommended for a fairly low resistance (ie, the temperature of the evaporator can be quite high).

And this is the Lemo 2 spread on parts