Vaporesso Tarot Pro 160W 18650 Box Mod

Genuine 160W Box Mod Tarot Pro by Vaporesso

Vaporesso Tarot Pro 160W
I’ll tell you frankly that the new version of the Tarot Pro Box Mod is probably one of the most interesting compositions I’ve ever seen .. Simplicity broken by 3 finishings side panels and hex buttons.

The dimensions of 93mm x 57mm x 23mm – that is almost identical to the previous version. Tarot Pro 160W was released in 3 great IMHO scenes color.
– Silver body with finished sides in color of carbon
– Black – Yellow body finished closer unknown to me a form of modern art
– Titanium body and imitates marble foil on the side panels.

Tarot Pro 160W have the top thread made of stainless steel with gold-plated, movable pin +, at the bottom vent holes. On one of the sides manufacturer placed the microUSB port for updating the software.
The front panel is a OLED display with a 0.91″, hidden behind the tinted plastic. Hexagonal fire button, two control buttons and button mode.
The Vaporesso Tarot Pro device is powered by two 18650 batteries. Although the device has a micro USB port that does not support charging – port is used only for software upgrades.

Installed in the Tarot Pro electronics OMNI allows us to smooth regulation of power from 5W to 160W. Tarot PRO supports temperature control for Nickel, Titanium and Steel wire – also allows manual adjustment of the temperature coefficient (TCR). It gives the ability to use Bypass Mode as well. It supports the resistance of 0.05 to 5 ohms and novelty in this device is the ability to set power curve and the curve of temperature.
After removing the back panel, mounted on neodymium magnets, in the middle we see only two neat place for batteries 18650. Contact pins are gold-plated to enhance conductivity – is a gold-plated moveable pin +.

Vaporesso Tarot Pro 160W Specifications:

– 6 modes of electronics
– CCW – setting the power curve
– CCT – setting the temperature curve
– Mode Bypass
– TCR – manual settings temperature
– Support for temperature control wires of nickel, titanium and steel
– Powered by 2 x 18650
– Continuously adjustable output power from 5W to 160W
– Support resistance from 0.05 to 5 ohm
– Electronics OMNI
– The output voltage of 0 to 8.5 V
– Software updates via microUSB port
– Neodymium magnets on back panel
– OLED display with a diagonal of 0.91 ”
– Gold-plated pin contact
– A number of temperature and short-circuit protection
– The dimensions of 93mm x 57mm x 23mm