Hana Modz DNA 30W including 18650 battery preinstall - Ireland
Electronic Mod Hana Modz 30w Clone
Hana Modz DNA 30 Features:
- Thread 510
- Dimensions: 88mm x24mm x49,5mm
- 7 - 30 W
- 4 - 8.3 V
- Supported resistance - 0.3 - 3.0Ω
- Includes charger 500mA and 18650 Battery
- When charging, the red LED, the charge will change to green
- KSD - euthanized after 1 minute, simply click once to work.
Hana DNA 30W Box Mod Specification:
-Type - DNA 30 mod
-Adjustable output voltage - 4 V-8.3 V
-Power Output - 7W-30W
-Voltage output - 4v-8.3v
-Performance - 94%
-Thread - 510
WARNING: THE ELECTRONIC BOX MOD HAS NO PROTECTION
AGAINST INSTALLING THE BATTERY THE OPPOSITE WAY.
THE BATTERY SHOULD BE PROPERLY INSTALLED JUST LIKE
INSTRUCTED. NOT INSTALLING AS DIRECTED WILL RESULT
WITH A BURNED ELECTRONIC.
- To change the power on the heater, press the button +/-
in the range of 7 to 30W at 0.1W
- Pressing the fire button 5 times within 7 seconds will lock or unlock the mod.
- Cut-off time administered voltages of 10 seconds
- After a minute of sleep time occurs. To re-awaken mod, press any button.
- Automatically detects resistance atomizer.
- To charge the battery, connect the charger attached included
micro USB slot. While charging, the LED will burn red.
When a battery charge LED color changes to green.
- To rotate the display 180st must first lock the device and then
hold for 10 sec the "FIRE" and "plus"
- To turn off the display when vaping must first lock the device
and then hold for 10 sec buttons "FIRE" and "minus"
- "Check atomizer" - occurs in the absence of an atomizer or a short circuit
- "Battery low vol" -Too low battery voltage.
Warranty 30 dyas