Your cart
You have no items in your shopping cart
Youde Twisted Kanthal Wire
Twisted Kanthal Resistance Wire - Sold in spools
Twisted Kanthal description:
By twisting the wire, the resistance of the coil is reduced but still
maintain the high coverage on the wick. Great for building your
custom RBA/RDA twisted wire coils, it's all about increasing the
surface area to give off more vapour.
High quality wire, perfect wire for rebuilding atomizers!
Wire Info:
- 26 AWG x 5m (long) Double Twisted - 0.4mm D (2 wires)
- 28 AWG x 10m (long) Double Twisted - 0.3mm D (2 wires)
- 30 AWG x 10m (long) Double Twisted - 0.25mm D (2 wires)
- 32 AWG x 10m (long) Double Twisted - 0.2mm D (2 wires)
- 28 AWG x 5m (long) Triple Twisted - 0.3mm*3 D (3 wires)
- 30 AWG x 5m (long) Quadruple Twisted - 0.25mm*4 D (4 wires)
Important Note:
Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers
with no multimeter or knowledge of how to use a meter, or when
a meter must be used, or how electronic devices work.
These materials cannot safely be used by the inexperienced or
those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
This item is not covered under warranty.
Package Contents:
1 x Spool Twisted Kanthal Wire
